NVIDIA Jetson
Set up pi-webrtc on an NVIDIA Jetson and watch the camera in your browser. This guide uses WHEP, so you do not need any server.
1. Check your JetPack version
pi-webrtc supports JetPack 6 (L4T R36). Check your L4T version:
head -n 1 /etc/nv_tegra_releaseFor example, # R36 (release), REVISION: 5.2 means L4T 36.5.2.
2. Connect the camera
Connect a CSI camera or a USB camera. Then list the video devices:
sudo apt install v4l-utils
v4l2-ctl --list-devicesA CSI camera shows up as vi-output, <sensor name>. A USB camera shows up with its own name. Note the first /dev/videoN device of a USB camera. For example, /dev/video0 means --camera=v4l2:0.
3. Install pi-webrtc
Install the libraries that pi-webrtc needs:
sudo apt update
sudo apt install libmosquitto1 pulseaudio libyaml-cpp0.7 libboost-program-options1.74.0JetPack already includes NVIDIA's FFmpeg libraries. Do not install Ubuntu's libavformat58, because it conflicts with them.
Download the release for your L4T version and unpack it. The file name is pi-webrtc_jetson-l4t-<version>.tar.gz. For L4T 36.5.2:
wget https://github.com/mazupo/pi-webrtc/releases/latest/download/pi-webrtc_jetson-l4t-36.5.2.tar.gz
tar -xzf pi-webrtc_jetson-l4t-36.5.2.tar.gzIf your version is different, find the matching file on the releases page.
Check that it runs:
./pi-webrtc -hYou should see a list of options.
4. Start streaming
CSI camera. Jetson reads CSI cameras with NVIDIA's libargus:
./pi-webrtc --camera=libargus:0 --uid=my-jetson --no-audio --use-whep --hw-accelUSB camera. Replace 0 with your camera number from step 2:
./pi-webrtc --camera=v4l2:0 --v4l2-format=mjpeg --uid=my-jetson --no-audio --use-whep --hw-accelAlways set --camera. Its default is libcamera:0, which does not exist on a Jetson.
pi-webrtc now waits for viewers on port 8080. Leave it running.
5. Watch in your browser
- Find the IP address of the Jetson:
hostname -I. - On a computer in the same network, open http://app.mazupo.com/whep.
- Enter
http://<jetson-ip>:8080as the WHEP URL, and connect.
Open the player with http://, not https://. The Jetson answers over plain HTTP, and browsers block that from an https:// page. If the browser asks to access devices on your local network, click Allow.
6. Make the video sharper
The default video is 640×480 at 30 fps. Stop pi-webrtc with Ctrl+C, and start it with a larger size:
./pi-webrtc --camera=libargus:0 --width=1920 --height=1080 --fps=60 --uid=my-jetson --no-audio --use-whep --hw-accel--hw-accel uses the NVIDIA hardware encoder. The Jetson Orin Nano has no hardware encoder, so pi-webrtc encodes in software there.
If the delay is higher than you expect, see Performance.